Furnace pre-furnace carbon-silicon-manganese analyzer

KD-TS6 Furnace Pre-furnace Molten Iron Quality Management Instrument (Carbon-Silicon-Manganese Analyzer)

Main performance characteristics:

It adopts anti-electromagnetic interference, dust isolation and integrated design, which is convenient and easy to operate. There are multiple testing lines, according to different grades of molten iron and the actual situation of molten iron in each factory to select the appropriate testing line, casting production quality control requirements; Make up for the shortcomings that the spectrum cannot accurately measure non-metallic elements (C, Si), and the time requirements for conventional analytical instruments to complete the pre-furnace analysis.

Main parameters:

1. Measurement function: thermal analysis of gray cast iron and ductile iron.

2. Measurement parameters: determine the tensile strength of molten iron Rm, hardness HB, nodularity SG%

3. Measuring range: CE: 2.50~4.95% C: 2.10~4.50% Si: 0.30~5.00% 

Mn: 0.10～1.80%    SG: 60～98%

4. Accuracy (%): Temp: ≤±1 °C CE: ± 0.05 C: ±0.05 Si: ± 0.1 Mn: ±0.1 SG: ±10

5. Working parameters: power supply AC 220V, 50Hz; The power is 80W, and the ambient temperature is 0~70°C

6. Measurement time: generally 1 minute and 30 seconds

7. Temperature sensor, brand LED display

Key features:

8 measurement lines and 8 target components can be set, and the measurement line and target components are linked; According to the measurement results, the amount of carburizer, ferrosilicon, scrap steel and ferromanganese is automatically calculated according to the target component, molten iron weight and yield; The results are automatically saved, and the test results and test waveforms can be queried by time; The measurement record can be transferred to a USB flash drive and viewed or printed on another computer.