Computer multi -element analyzer

KD-1000 computer multi-element analyzer

1. The performance characteristics of KD-1000 computer multi-element analyzer:

★ Computer multi -element analyzer can detect conventional elements in materials such as steel, non -ferrous metals C, S, Mn, P, Si, CR, Ni, MO, CU, TI, V, Zn, FE, etc.;

★ Carbon sulfur adopts infrared analysis, and other elements use photoelectricity ratio

★ Using brand computer microcomputer control, electronic balance is called meter, desktop printer prints and detection results;

★ Test the software function is large, which can replace the traditional manual writing work, and can set the test report format at arbitrarily according to the actual needs of each unit;

★ The detection function is huge, with a channel space that detects multiple elements, and stores multiple detection lines.

★ Compatible with KD-8, HW2000D function.

Second, KD-1000 computer multi-element analyzer main parameters:

Concentration range: 0.0000-99.999%automatic display

Electric source: AC 220V ± 10%50Hz

Electricity consumption: ≤50W

Measurement scope: (Due to the many elements that can be detected in the instrument, common elements such as C, S, Mn, P, Si, CR, Ni, etc. are now used as an example)

C: 0.001 ~ 10.000%s: 0.0005 ～ 2.000%

Mn: 0.010 ～ 20.500%P: 0.0005 ～ 1.0000%

SI: 0.010 ～ 18.000%CR: 0.010 ～ 38.000%

Ni: 0.010 ～ 48.000%MO: 0.010 ～ 7.000%

Σre: 0.0100 ～ 0.500%mg: 0.0100 ～ 0.800%

CU: 0.010 ～ 8.000%TI: 0.010 ～ 5.000%

If the test conditions for changing the computers multi -element analyzer can be expanded accordingly.